FAQ

Frequently Asked Questions 

How To Use A 3Pursuits Gravity Infuser?

  1. Fill with water through the hole in the body into the lower globe up to the visible shoulder of the glass. 
  2. Attach the top globe and turn until just snug. 
  3. Add material to your smoking bowl. 
  4. Rotate the unit all the way and then ignite your material. 
  5. When water starts to drain, smoke will be pulled into the top globe. 
  6. When all water has been drained through the device, you can pull from the unit or rotate again to have all the smoke pushed out to you for a contactless experience.

How Do I Fill My 3Pursuits Gravity Infuser with Water? 

  1. Begin by removing the top globe by unthreading or turning it counterclockwise. Pour water in the drain hole, through the body into the bottom globe. 
  2. Please stop filling when the water level reaches the top of the visible glass (bottom globe). 
  3. Replace the top globe by threading it clockwise. 
  4. Adjust until just snug. 
  5. Do Not Remove the Bottom Globe from The Bottom Side when filled with water.
  6. Fill with water through the hole in the body into the lower globe up to the visible shoulder of the glass. 
  7. Attach the top globe and turn until just snug. 
  8. Add material to your smoking bowl. 
  9. Rotate the unit all the way and then ignite your material. 
  10. When water starts to drain, smoke will be pulled into the top globe. 
  11. When all water has been drained through the device, you can pull from the unit or rotate again to have all the smoke pushed out to you for a contactless experience.

How Do I Clean My 3Pursuits Gravity Infuser?

The only recommended way to clean your 3Pursuits Gravity Infuser is with isopropyl alcohol. Gently swab the inner parts to clean. Using any other cleaners may damage the anodized finish and are to be avoided. Only the glass globes are dishwasher safe. Do Not place any other parts in a dishwasher.

How To Quick Clean My 3Pursuits Gravity Infuser?

  1. Remove the top globe. 
  2. Rotate the unit to empty out all water. 
  3. Fill with ½-1 inch of isopropyl alcohol. 
  4. Thread the top globe back on the device. 
  5. Rotate the unit numerous times until clean. 
  6. Remove the top globe, drain alcohol and rinse with clean water.
  7. Remove the magnetic bowl intake adapter end cap and then the rubber plug to clean inside the valve. 
  8. Removing and disassembly of the up stems may also be necessary for optimal use.

How To Deep Clean My 3Pursuits Gravity Infuser?

  1. Remove the top globe. 
  2. Rotate the unit to empty out all water. 
  3. Rotate then remove the other globe from the top side. 
  4. Remove each stem counterclockwise. 
  5. Use a Hex Head Allen key (included in the maintenance kit) and locate the hex head bolt on the underside to remove the mouthpiece elbow. 
  6. Pull the elbow off. 
  7. Now pull the entire body off the valve. 
  8. Gently rotate the body back and forth to work it off the valve. 
  9. Clean all parts with isopropyl alcohol. 
  10. Replace seals if needed. 
  11. Place one bushing and rubber seal back into the body cavity. 
  12. Place the last bushing and seal it into the body cavity. 
  13. Push the body back onto the valve. 
  14. If the bushing pushes out when doing so, you have it on backward. 
  15. Ensure the outlet hole is facing the mouthpiece side. 
  16. Replace outer seals and/or O-rings if equipped.
  17. Reinstall the mouthpiece and thread the hex head bolt back in. 
  18. Reinstall up stems. 

What Is a 3Pursuits Gravity Hookah? 

Hookah is used to smoke flavored tobacco mixtures. There are many types of hookahs, such as Egyptian hookahs, Syrian hookahs, and anodized aluminum hookahs – which are particularly popular in the U.S. and Canada. 

3Pursuits Gravity Bong Hookah uses water and kinetic energy to create a consistent flow of smoke.

How To Use The 3Pursuits Gravity Infuser?

Want to learn how to use 3Pursuits Gravity Bong Infusers for hookah, and flower, or to enhance the concentrate experience? 

3Pursuits Gravity Infuser Tips & Tricks 

  • Make sure all parts are where they need to be and store the accessories safely
  • Do not overfill
  • Clean regularly

Troubleshooting Gravity Infuser 

Both stems need to be secured in place for the device to function. The outer percolator can be removed however the center up stem must be in place on both sides.

  • If your unit is not drawing in smoke properly, be certain the valve pin is in place.
  • If the valve pin is in place, be certain the body is on the correct way with the outlet hole on the mouthpiece side:
  • If you experience a leak, be certain the unit is clean, and the stems have been disassembled and cleaned inside. You may need to also push the body towards the upright to ensure the seals are tight.
  • If you hear water inside the valve, simply tilt the unit towards the side so the water inside can drain back into the unit. 
  • If your unit is dirty, then the drain hole inside the valve may be clogged. Remove the magnetic bowl elbow and rubber plug and then run a chenille through the valve to ensure it is clear

What do I do if my glass globe gets stuck? 

  • If the collar is turning when trying to remove a globe, you have a device with removable rubber collars. Pull away from the body and they can be removed. 
  • Clean the back of the collars and the body, next reinsert them, ensuring they are seated flush with the top of the unit and the lip is seated into the groove all along the bottom.
  • If you have a leak from this area or the globe, please contact customer service.
  • If your globe is stuck and the collar is not moving, we recommend first placing the unit on the floor, ensuring its stability, and standing over it to use both hands to turn the globe. 
  • It may take a few tries and you may need to push down or pull up very slightly however that should free the globe up to remove it.
  • If this does not work, please pour out the remaining water through the mouthpiece then pour some isopropyl alcohol into the unit and rotate numerous times to allow the alcohol to free up whatever has the globes stuck to the collar.
  • Pause in the 1 o’clock position on all sides for a few minutes to allow the alcohol to rest between the globe and collar and then try again.

What can I do if the unit is difficult to rotate? 

If your 3Pursuits Gravity Infuser starts to get difficult to rotate, clean them immediately. Use the Quick Clean method to ensure the inside valve seals are clean.

If these are not cleaned regularly, the material will build up causing the unit to get stuck and eventually tear the seals. If this occurs, you will need a maintenance kit to replace the seals.

Why is there no smoke out of the mouthpiece or being pulled into the unit? 

The stems on your 3Pursuits are clogged or the valve/bowl intake is clogged. 

Please follow the steps in the Quick Clean or Deep Cleaning to clean your up stems and valve. 

If that is not the issue, then the body may be backward. The outlet hole should be on the mouthpiece side. 

Why do the mouthpiece and valve rotate and not stay in one place? 

The valve pin was removed and not replaced. This is a small pin that fits into a groove under the bowl elbow. This is used to hold the valve in place for a table mount to a wall mount. When removing the magnetic elbow, ensure this part is not lost. Place the pin in the center groove for the table mount or a side groove for the wall mount.

What can I do if water is leaking from the Globes? 

If your unit is equipped with removable collars: ensure the threaded collar is seated all the way into the body, sitting flush with the top of the body. Press along the bottom inside of the collar to ensure it is fitted into the groove in the bottom of the body all the way around.

If issues persist, remove the collar, clean the body and collar, and then dry out completely before replacing it. Thread the globe in so it is snug. If the globe is difficult to thread in, use a small amount of vegetable oil on the threads.

If your unit has solid plastic collars that cannot be removed, please contact customer service.

What can I do if my Globe is stuck or hard to remove? 

If your globe is stuck, place the unit on the floor and stand directly over it. Use both hands to turn the globe. You may need to push down or pull up very lightly at the same time.

If the issue persists, follow the Quick Clean steps to get isopropyl alcohol into the body and under the edge of the glass to help free it up.

If you cannot remove either globe, pour out all the water through the mouthpiece. Fill with some isopropyl alcohol through the mouthpiece then rotate numerous times and complete the steps above.

Can I change the up-stem configuration? 

The 3Pursuits Gravity Infuser up stems are two separate pieces: the center up the stem and the outer percolator shell. The shell can be separated from the stem by holding onto the shoulder above the threads and turning the outer shell counterclockwise. 

You can choose to take one off one side and leave the other on or, take both off and leave both on. It is recommended to periodically clean inside these stems for optimal performance.